STEP 1:
Use a hair dryer to heat the area where the lettering needs to be removed.
A heat gun can also be used, but is not recommended for beginners as you may damage the surface by applying to much heat.

STEP 2:
Use an old credit card to lift one of the corners and then peel away.

STEP 3:
When removing self adhesive lettering from signs you can be left with the adhesive/glue on the panel.
Use a mild solvent like turpentine in a spray can to moisten the glue and after a minute remove with a tissue paper.
Do not use thinners or strong chemicals as this will damage the surface.

STEP 4:
Thereafter, clean the surface with a dish wash mixture - 1 table spoon sunlight mixed with 500mm water and a cotton cloth.

On vehicles: polish the panel where the graphics were removed. If the graphics were on the vehicle for a long time, it is advisable to send it for a machine polish at your local car wash.